Welbilt Manitowoc LBCS1360, Installation, Operation And Maintenance Manual

Part Number: 000016539 11/20 

5

Model Numbers

This manual covers the following model

Ice Storage and Transport System

LBCS1360

Before You Begin

After uncrating and removing all packing material, inspect 

the equipment for concealed shipping damage. If damage is 

found, notify the shipper immediately.

n

Warning

Do not operate equipment that has been misused, 

abused, neglected, damaged, or altered/modified 

from that of original manufactured specifications. This 

appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless 

they have been given supervision concerning use of the 

appliance by a person responsible for their safety.

Warranty

For warranty information visit: www.manitowocice.com/
Service/Warranty
• Warranty Coverage Information
• Warranty Registration
• Warranty Verification
Warranty coverage begins the day the equipment is installed.

WARRANTY REGISTRATION

Completing the warranty registration process is a quick and 

easy way to protect your investment.
Scan the QR code with your smart device or enter the link in 

a web browser to complete your warranty registration.

WWW.MANITOWOCICE.COM/SERVICE/ WARRANTY#WARRANTY-REGISTRATION

Registering your product insures warranty coverage and 

streamlines the process if any warranty work is required.

Important Warnings and Operating Rules

Read this manual completely before assembling or operating 

Ice Transport System and follow warnings and instructions 

listed below.

n

Warning

To avoid damage to Ice Transport System and injury 

during operation:

• Do not move Ice Transport System once ice machine

has been installed.

• Flanged feet must be anchored to the floor.
• To avoid instability the installation area must be

capable of supporting the combined weight of the

equipment and product.

n

Warning

To avoid injury during operation of unit:

• Keep head, face and entire body away from paddle

handle when breaking up ice

• Moisture collecting on the floor will create a slippery

surface. Clean up any water on the floor immediately

to prevent a slip hazard.

• It is the responsibility of the equipment owner to

perform a Personal Protective Equipment Hazard

Assessment to ensure adequate protection during

maintenance procedures.

• The on-site supervisor is responsible for ensuring that

operators are made aware of the inherent dangers of

operating this equipment.

For best operation and to ensure delivery of clean, sanitary 

ice:
• Bin system must be level in both directions to provide

proper drainage.

• Position cart in bay before opening hopper door.
• Keep paddle clean and in good repair to avoid ice

contamination.

• Cover ice with cart lids when transporting.
• Follow instructions in this manual for bin and cart

cleaning and maintenance.

• Drain melt water from cart when positioned in bay by

opening drain valve.

• Keep glass, dirt and other foreign objects out of bin and

cart at all times.

Installation Operation Maintenance