Oral Mode
Note: DO NOT
eat or drink anything before the measurement, or bite on the product.
• To ensure that reading is as accurate as possible, place the thermometric sensor to the left or right
of the underneath/root of the tongue. Ensure the screen faces upwards.
• The thermometric sensor must have constant contact with the tissue during the reading and be
placed under the tongue in one of the two heat pockets at the back. Press the tongue down to
hold the product in place.
• Keep the mouth closed during the
reading and breathe evenly through
the nose, while holding onto the
product to keep it from moving during
measurement.
• There are different heat zones in the
mouth. Generally, the oral temperature
is 0.3°C to 0.8°C lower than the rectal
temperature.
Rectal Mode
Note:
This is the most accurate method from a medical point of view, because it comes closest to
the core body temperature.
DO NOT
attempt rectal measurements on persons with rectal disorders.
• Lubricate with a water-soluble gel.
DO NOT
use petroleum jelly.
• Gently insert the thermometric sensor no more than 2cm into the rectum.
DO NOT
force the
product into the rectum. Stop insertion and abort the measurement when pain is present.
Note:
The rectal method is the most accurate method for identifying the basal temperature
and it is advised to extend the measuring time by 3 minutes after the beep.
Underarm Mode
(axillary)
Note:
Wipe off any underarm perspiration and deodorant prior to taking a reading under the arm.
• Place the thermometric
sensor in the centre of the
armpit. It must be touching
the skin, remove clothing if
necessary.
• Turn the screen so that it
faces inwards.
• Hold the product in place by
slightly applying pressure
inwards towards the body.
• The product should be placed at an angle of 35-45 degrees in relation to the arm.
Placing the product in the armpit provides a measurement of surface temperature that can
fluctuate by around 0.5°C to 1.5°C from rectal temperature readings in adults.
Note:
An exact reading cannot be obtained if, the armpits have been allowed to cool. If this is the
case, we recommend extending the measuring time by around 5 minutes in order to obtain the
most precise possible reading that corresponds as closely as possible to the core body temperature.
Maintenance
Cleaning
• Always clean/disinfect the product before and after use to avoid cross contamination.
• Only clean with disinfectant (70% medical alcohol) using a damp cloth.
• Rinse only the thermometric tip under slow running cold water and then dry with a
clean soft cloth.
• DO NOT
use harsh chemical cleaning agents.
• DO NOT
immerse the product under water; rinse with hot water over 50°C; soak in alcohol
for a long period of time; or use ultrasonic washing to clean the product as this can damage
the electronics.
Storage
• Wipe away any dirt and dust from the product.
• Store the product in it’s protective cover while not in use.
• DO NOT
store the product in the protective cover when it is damp. Wipe it off with
a clean dry soft cloth first.
• Store in a safe cool dry place, away from children as per Safety Warnings.
• DO NOT
place any heavy objects on the product.
Battery
• When the low battery symbol is shown
on the bottom right of the screen the battery
life is depleted. .
• Dispose of as per instructions. Non replaceable battery. Battery life is approximately 3 years.
Troubleshooting
Error Code
Problem
Solution
Lo
Lo
Temperature taken is lower
than 32.0°C(89.6°F)
Turn off, wait one minute and take a new
temperature.
Hi
Hi
Temperature taken is higher
than 42.9°C(109.2°F)
Turn off, wait one minute and take a new
temperature.
Err
Err
The thermometer is not
functioning properly.
Contact our customer service centre.
Dead battery: battery icon
is flashing/not completing a
measurement.
Dispose of the unit as per instructions.
If the problem is not solved by the troubleshooting guide or you have any queries, please
contact our service centre:
In Australia - 1800 807 464 In New Zealand - 0800 523 583
DO NOT
attempt to open or repair the product yourself.
Note:
The product is initially calibrated at the time of manufacture. If this product is used
according to the instructions, re-calibration should not be required. However, if you feel that
the product is out of specification, please contact us.
Technical Data
Product Name
Welcare Digital Thermometer (Ovulation)
Model No.
WDT-OV100
Power Type/Rating
Zinc Manganese Alkaline Button Battery (LR41 1.5V DC)
Battery Life
Approx. 200 hours of continuous operation
or 3 years with 1 measurement per day
Thermometer Type
Maximum (Oral, Rectal & Underarm). Sensing unit = Thermistor.
Measurement Range
32.00 - 42.90°C / 89.60 - 109.20°F
Measurement Scale
Increments
0.01°C / 0.01°F
Measurement
Accuracy
±0.20°F(±0.10°C) during 95.90°F~107.60°F (35.50°C~42.00°C) at
64.40°F~82.40°F (18°C~28°C) ambient operating range
±0.40°F (±0.20°C) for other measuring and ambient operating range
Operating Conditions
Temperature: 5 - 40°C
Humidity: 15°C - 95°C RH (non-condensing)
Atmospheric pressure: 700hPa to 1060hPa
Storage/Transport
Conditions
Temperature: -20 - 55°C
Humidity: 15°C - 95°C RH (non-condensing)
Atmospheric pressure: 700hPa to 1060hPa
Dimensions
13.9cm x 2.2cm x 1.3cm (L x W x H)
Weight
Approx. 12g including battery
IP Rating
IP27
The first digit indicates the level of protection that the enclosure
provides against access to any hazardous parts and the ingress of
solid foreign particles.
2 = protection against particles >12.5mm
The second digit indicates the level of protection that the enclosure
provides against the harmful ingress of water.
7 = Protected from immersion between 15 cm and 1 m in depth.
Applied Part
Type BF Equipment
– Degree of protection against electric shock
Firmware
Name: DMT-3018
Build: MT18GPCB
Version Number: Z
Materials
ABS + TPE plastic, Stainless Steel, Silica Gel, LCD Screen, Nickel
Plated Iron Safety Screw
Contents
Welcare Digital Thermometer, Storage Case, Battery (permanently
installed in product), Instruction Manual and Warranty Card
Your Welcare Digital Thermometer comes with a 1 Year Limited Warranty.
See the enclosed Warranty Card for further information.
Register your warranty online at www.jadavey.com.au
For warranty repairs call:
In Australia - 1800 807 464
In New Zealand - 0800 523 583
This device complies with the provisions of the EC directive 93/42/EEC (Medical Device
Directive) and the European Standard EN124703:2000+A1:2009, Clinical thermometers
- Part 3: Performance of compact electrical thermometers (nonpredictive and predictive)
with maximum device.
Important information regarding Electro Magnetic Compatibility (EMC)
Welcare Digital Thermometer manufactured by Joytech Healthcare Co., Ltd conforms to
EN60601- 1-2:2015 Electro Magnetic Compatibility (EMC) standard.
Further documentation in accordance with this EMC standard is available at
www.jadavey.com.au
Disposal
At the end of its life, please treat this product as electronic waste an dispose of
responsibly according to the current local regulations.
V06/22
Place tip in
centre of
armpit.
Raise arm
35˚– 45˚
Lower arm
to hold
product in
place
Face screen
inwards
Manufactured by:
JOYTECH HEALTHCARE CO., LTD
No.365, Wuzhou Road, Yuhang Economic Development
Zone, 311100, Hangzhou, China.
Distributed by:
(Australia)
J A DAVEY PTY LTD
626 Lorimer Street
Port Melbourne, VIC 3207
(New Zealand)
J A DAVEY LTD
C/- Healthcare Logistics
58 Richard Pearse Drive
Mangere, Auckland 2022
Placement points under
the root of the tongue
Tongue
Root of tongue
Face screen
upwards
Summary of Contents for WDT-OV100
Page 3: ......