4-6 Network Menu
4-19
Chap.
4
< Authentication >
1:OPEN
2:SHARED
■
WEP (refer to P.4-20 for details)
WEP can be set to either "Null," "40 bits," or "128 bits."
●
TxKEY_ID
Select the ID used for transmission from KEY1-KEY4 set in the next
paragraph "KEY setup." This becomes effective if the WEP settings are set to
other than "Null."
Communication is possible only if the contents of both the TxKEY_ID WEP key
and the access point WEP key are the same, and if the contents of both the Trans-
mitKEY WEP key set on the access point and the terminal's WEP key are the
same.
For example, when the TxKEY_ID of a terminal is set to "2," the contents of the
terminal WEP key 2 and the contents of the access point WEP key 2 need to be the
same. On the other hand, when an access point TransmitKey is set to "3," the con-
tents of the access point WEP key 3 and the contents of the terminal WEP key 3
need to be the same.
●
KEY Setup
Setting the contents of each WEP key (1, 2, 3, 4).
Characters which can be used are "0" - "9", "A" - "F" and "a" - "f." When a 40
bits is selected for "WEP," the WEP is a fixed 10 characters. When 128 bits is
selected, it is a fixed 26 characters. The number of characters that are
actually input is always 26. Therefore, when 40 bits is selected, the first 10
characters of the 26 characters are applied. If a trigger key is pressed, the
setup can be done by scanning a barcode.
Each WEP key setup can be overwritten but cannot be edited.
On entering the KEY setup screen, it displays "00000..." for security purposes.
■
Authentication (refer to P.4-20 for details)
OPEN
Sets up an "Open Authentication" system.
SHARED
Sets up a "Shared Key Authentication"
system.
< WEP >
1:WEP Disable
2:TxKEY_ID KEY1
3:KEY Data
Summary of Contents for CTR-800-11W
