Pilot
Light
F1 T.04L
Split-Bobbin
Step-Down
Transformer
Terminal
Block
Outside
of Battery
Handles
Plug
(According to
Model No.)
2.5 v. Or 3.5v.
Nickel Cadmium
Batteries
F2 T.04L
27
27
CIRCUIT DIAGRAM
SPECIFICATIONS
Model Numbers: 71114, 71116,71118, 71154, 71156, 71158
Power Cord - 0.75mm , 3 wire earthed cord, 3m. Long
Input...Class 1...220-250v. (Numbers 71114, 71116, 71118, 71154, 71156, 71158)
50-60 Hz., .04 Amp.
Output...Model Number 60713, 71500 for 71670 Rechargeable Battery Handles
(charging rate: 75 ma. for 71500 and 60713; 60 ma. for 71670)
Fuses...(F1 and F2)...40 ma. Time lag low breaking capacity, 250 V.
Leakage Current is less than 10 microamps from any exposed metal part when proper earth is used.
Weight - approximately 1.25 kg.
Dimension - Charger requires only 18.4 x 8.9 cm.
Optional Charger with specula holder requires 18.4 x 21.6 cm.
Transport/Storage - 40 F (-40 C) to 122 F (+50 C) 95% RH Max.
2
o
o
o
o
DESK CHARGERS
Thank you for purchasing this convenient
charger for diagnostic instruments. The
specifications and maintenance instructions
contained in this pamphlet should be
followed to insure years of convenient service.
Manufactured in
compliance with EN60601-1
Numbers: 71114, 71116, 71118
71154, 71156, 71158
Listed Product
ETL Laboratories
4341 State Street Road
Skaneateles Falls, NY 13153-0220 U.S.A.
Pilot
Light
F1 T.04L
Split-Bobbin
Step-Down
Transformer
Terminal
Block
Outside
of Battery
Handles
Plug
(According to
Model No.)
2.5 v. Or 3.5v.
Nickel Cadmium
Batteries
F2 T.04L
27
27
CIRCUIT DIAGRAM
SPECIFICATIONS
Model Numbers: 71114, 71116,71118, 71154, 71156, 71158
Power Cord - 0.75mm , 3 wire earthed cord, 3m. Long
Input...Class 1...220-250v. (Numbers 71114, 71116, 71118, 71154, 71156, 71158)
50-60 Hz., .04 Amp.
Output...Model Number 60713, 71500 for 71670 Rechargeable Battery Handles
(charging rate: 75 ma. for 71500 and 60713; 60 ma. for 71670)
Fuses...(F1 and F2)...40 ma. Time lag low breaking capacity, 250 V.
Leakage Current is less than 10 microamps from any exposed metal part when proper earth is used.
Weight - approximately 1.25 kg.
Dimension - Charger requires only 18.4 x 8.9 cm.
Optional Charger with specula holder requires 18.4 x 21.6 cm.
Transport/Storage - 40 F (-40 C) to 122 F (+50 C) 95% RH Max.
2
o
o
o
o
DESK CHARGERS
Thank you for purchasing this convenient
charger for diagnostic instruments. The
specifications and maintenance instructions
contained in this pamphlet should be
followed to insure years of convenient service.
Manufactured in
compliance with EN60601-1
Numbers: 71114, 71116, 71118
71154, 71156, 71158
Listed Product
ETL Laboratories
4341 State Street Road
Skaneateles Falls, NY 13153-0220 U.S.A.
