OM-235 816 Page 3
SECTION 2 − SPECIFICATIONS
2-1.
Specifications
LS17
Ampere Rating
150 Amps W/Argon Gas @ 60% Duty Cycle DCEN; 125 Amps W/Argon Gas @ 60% Duty Cycle ACHF
Cooling Method
Air
Tungsten Size
.020 Thru 1/8 in. (0.5 Thru 3.2 mm)
Cable Options
12-1/2 ft (3.8 m) or 25 ft (7.6 m) One-Piece High−Flex
Dimensions
Length: 8 in. (203 mm); Handle Diameter: 1 in. (25 mm); Weight: 6.1 oz (172 g)
2-2.
Duty Cycle
sb1.5* 8/93
60% Duty Cycle AT 150 Amperes DCEN Using Argon Gas
Duty Cycle is percentage of 10
minutes that torch can weld at
rated load without overheating.
0
10
Minutes
Definition
6 Minutes Welding
4 Minutes Resting
60%dutycycle
60% Duty Cycle At 125 Amperes ACHF Using Argon Gas
NOTICE − Do not exceed rated amperage or duty cycle (see Section 2-1). Exceeding
rated amperage or duty cycle can damage torch and void warranty.
.
TIG Tip: Maintaining good electrical contact between your tungsten and collet helps improve current transfer and weld quality. Keep your TIG
torch components tightened and check regularly for worn parts.
