29
IOM-181 | MODEL: ECOSYSTEM™ WITH XLT CONTROLLER | REV: C
13839 West Bellfort Street, Sugar Land, TX 77498
welker.com
Service Department: 281.491.2331
Changing Values on Setup Screens
Numeric Values
1.
To change a numeric value, use the arrows to highlight the value to be changed, and then press ENTER (
Figure 13
). A
keypad will appear on the screen.
2.
Type the new numeric value using the keypad.
3.
Once the new numeric value has been entered, press ENTER to save the changes.
If the new value entered is outside the range of allowable values, the value will revert back to the previous value once ENTER is
pressed. The keypad will stay active, allowing another value to be entered.
Text Values
4.
To change a text value, press on the value to be changed. A dropdown menu will appear on the screen.
5.
Scroll through the value’s options using the arrows in the dropdown menu.
6.
Highlight the desired text value, and then press ENTER to save the changes.
If a mistake is made while entering the new value or if the value does not need to be changed, press ESC to discard the changes.
