NOTICE:
After full charging cycle, use this battery to start matched vehicle’s engine. If engine cannot be activated
(exclude the problem of vehicle itself), it indicates this battery has declined storage capacity and need to be replaced.
ERROR LIGHT
When ERROR light is on, it means the charger detects invisible fault. Therefore, the user should solve the fault before
use. If the user could not solve problems, please consult the professional person.
ERROR INDICATORS
CODE
ERRORS
SOLUTIONS
E01
Charger overheating
The charger will automatically suspend the
charge and send out a warning sound, at this
time the user does not have to cut off the
power and wait for the charger to recharge
when the charger is cooled
E02
Poor contact of battery or
battery pole leads to bad
contact
Reconnect the battery or clean the battery pole
E03
Charging mode and
battery voltage mismatch
Charging the 12V battery in the 6V mode will
cause mismatch. The charger will send out a
warning sound, at this time the user needs to
cut off the power and reselect the mode.
E04
Battery can not store
electricity
The battery has been damaged and the charger
can't repair the battery.
E05
The battery is seriously
vulcanized and cannot be
repaired
The battery has been damaged and the charger
can't repair the battery.
E06
Reverse connection
Disconnect and re-connect
Waste electrical and electronic equipment are a special waste category, collection,
storage, transport, treatment and recycling are important because they can avoid
environmental pollution and are harmful to health. Submitting waste electrical and
electronic equipment to special collection centers makes the waste to be recycled
properly and protecting the environment. Do not forget! Each electric appliance that
arrives at the landfill, the field, pollutes the environment!
Importer & distributor:
SC VITACOM ELECTRONICS SRL
CIF: RO 214527
Tel. 0264-438401*
