IFQ332 User Guide
12
You can also check the details of the service when you click the Service Name
QAM Output Status
>IFQ332 status also show the QAM output. Just like the IP Input, this show
the Total Bitrate and effective Bitrate in each 32 channels. The TS Analysis and Service List
have the same function as in the IP input. The Status also show the current temperature of the
unit on the upper left corner. See image below for reference.
3.4
Parameter Setting
IFQ332 Parameter Setting is where we input the parameters for IP Input and QAM Output.
IP Input Parameter Setting
> In this page, there are three tabs where you can modify the
multicast IP, port and parameter of IP Input. There are Port 1, Port 2, and Batch Setting. The
input can accept Multicast or Unicast and support MPTS and SPTS.
Port 1 and Port 2 have same interface. It shows the 256 channels. Put a tick on the box
under Enable to enable to channel. Input the correct Multicast/Unicast IP address and IP port,
