9
9
Operation
Using the device
• Insert your hand (palms facing
down) into the hand insert on the
device.
• WARNING
: DO NOT turn on the
device until your hand is inside.
• Once your hand is inside and in a
comfortable position, press and
hold the POWER button to turn the
device on; the power indicator on
will light up red.
Charging the device
• Use the supplied USB-C charging cable to connect to the USB-C port on the
device and the other end to a 5V power adaptor (not included).
• Charge for 3 hours which is the time required for the device to be fully charged.
• Press the INTENSITY button to start. Press repeatedly to increase the intensity
level (default is L3). The higher the number, the higher the intensity. The
intensity indicators will light up on the currently selected intensity level.
• Press the MODE button to start the built-in massage modes. Press repeatedly
to change the different massage modes (there are 6 built-in massage modes).
The massage mode indicator will light up on the currently selected massage
mode.
• Press the VIBRATION button to turn vibration on. The Vibration indicator will
light up. Press again to turn vibration off.
• Press the HEAT button to turn heating on. The Heat indicator will light up.
It will take approximately 5 minutes to come into effect. Press again to turn
heating function off.
• After use, press and hold the POWER button to turn the device off. Slide your
hand out of the device after the device is off.
• Note: the default operation time of the device is 15 minutes. The device will
automatically turn off after 15 minutes of continuous use.
• Note: After massage operation, red dots/marks will be visible on
your hand. Please note this is normal, the marks are temporary
and will disappear after approximately 20 minutes.
