Wellcare FE-5856, User Manual

8

8

Getting Started

Before first use

•  Unpack the product and accessories and ensure all parts of the product are 

undamaged and in good working order. Keep the original packaging carton and 
materials in a safe place. It will help prevent any damage if the product needs to 
be transported in the future, and you can use it to store the product when it is 
not in use. In the event that the packaging is to be disposed of, please recycle 
all packaging materials where possible.

•  Plastic wrapping can be a suffocation hazard for babies and young children, 

so ensure all packaging materials are out of their  reach and disposed of safely.

•  Unwind the cord of the charging cable to its full length and inspect it for 

damage. Do not use the product if any part is damaged or not working 
properly. In case of damage, contact our after sales support line for advice.

•  Read this manual to familiarise yourself with the product. Pay particular 

attention to the safety instructions on the previous pages.

Charging the device

•  Charge for 5 hours with the supplied USB charging cable before first use.
•  The battery indicator on the device will flash during charging.
•  Once the indicator stops flashing and lights up green, it indicates that the 

device is now fully charged.

•  When the battery is low, please charge the device again.

Battery indicator colour 

•  Green (4 lights are lit up) - battery is fully charged.
•  Green (1 light is lit up) - battery is low.
•  Green (1 light is flashing) - no battery - device will automatically turn off.

Only use the device:

-  On a dry surface of the body, over clothing, by lightly pressing and moving across 

the body for approximately 60 seconds per region

-  On the body's soft tissue, as desired, without producing pain or discomfort — do 

not use it on the head or any hard or bony area of the body

-  With the supplied applicators — chose the one that provides the best effect.
Bruising can occur regardless of the control setting or pressure applied. Check 
treated areas frequently and immediately stop using the device at the first sign of 
pain or discomfort.