3.2
Lubrication
A)
The following applies in connection with normal operating conditions (air
intake and ambient temper40ºC max. and permissible total
differential pressure): After approximately 20.000 hours of operation or
after two and a half years at the latest, the rolling-contact bearings and
adjacent spaces should have the old grease removed and be recharged
with new grease. About 50% of the free space in the rolling-contact
bearings and about 65% of the adjacent grease spaces should be filled
with grease.
B)
Closed rolling-contact bearings should be replaced with new ones; their
adjacent grease spaces are not filled with grease.
C)
The information given concerning bearing life and grease life applies to
only this product. Always avoid mixing different types of greases.
D)
Type of grease used in bearings is Mobilgrease XHP220
