2
Operation
2.1
Transport and storage
When lifted by a crane, Kleeblower units must be secured at the eye bolt
on the pump casing.
Pay attention to the load-bearing capacity of the hoisting equipment. See
previous page for weight data.
The rolling contact bearings should be regreased or enclosed. They should
be replaced with new ones if more than four years have elapsed between
delivery and machine commissioning under favourable circumstances
(storage in a dry, dust free and vibration free room). Under unfavourable
circumstances, this period is considerably reduced.
2.2
Installation
A)
Kleeblower units can be installed in vertical, horizontal or slantwise
position. However take bearing load into consideration when installing the
blower: The following examples are for your reference:
CORRECT
INCORRECT
B)
An awning is required for the blower if it is installed outdoors, avoiding
motor from being damaged.
C)
The base with which the blower is fastened must be 3 times as heavy as
the blower.
