background image

WHP-300-Man-4p.doc 

Page 4 

12/31/2002 

AlanD 

Page 4 

12/31/2002 

Always return the soldering tool to its original holder when not in use. 
Do not bring combustible materials near the hot soldering tools. 
 
 
2. Take care for the surroundings.  
Don't use the soldering tool in a moist or wet environment.  
 
3. Protect yourself against electrical shocks.  
Avoid touching grounded parts with your body, e.g. pipes, heating 
radiators, stoves, refrigerators. 
 
4. Keep children at a distance.  
Don't allow other persons to touch or disturb the soldering tool or cord. 
Keep other persons away from your work area. 
 
 
5. Store your soldering tool in an appropriate place  
Unused soldering tools should be s tored in a dry location which is out of 
the reach of children (some place high or in a locked cabinet). Switch 
off all unused soldering tools.  
 
6. Do not overload your soldering tool.  
Use the soldering tool only with the specified voltage or specified 
pressure and pressure range. 
 
 
7. Use the appropriate soldering tool.  
Don't use a soldering tool whose performance is not adequate for your 
work. Never use the soldering tool for purposes for which is was not 
designed. 
 
8. Wear suitable work cloths.  
There is a danger of burning yourself with liquid solder. Wear the 
corresponding protective clothing in order to protect yourself against 
burns. 
 
 
9. Protect your eyes. 

 
 

Wear protective eyewear. When working with bonding agents, it is 
particularly important to observe the warning notices of the bonding 
agent manufacturer. Protect yourself against  spattering solder. There is 
a danger of burning yourself with liquid solder.  
 
 
10. Use a soldering vapour suction device  
If devices for solder vapour suction are available, en sure that these are 
connected and correctly used. 
 
 
11. Do not use the cord for purposes for which it is not designed.  
Never carry the soldering tool by the cord. Don't use the cord to pull 
the power plug from the socket. Protect the cord from heat, oil, a nd 
sharp edges. 
 
NOTE – This manual was compiled from an OCR of the original Weller Manual 
005-56-912-04/6.00 BB 0,3 Copyright by Cooper Tools GmbH, Germany with 
images produced by CASA 

Summary of Contents for WHP-300






Reviews: