Weller whs 40d, Operating Instructions Manual

17

1. Safety guidelines

The manufacturer accepts no liability for usage other than that specified in the
operating instructions, nor for any unauthorised modifications.

These operating instructions and the warning instructions they contain should be read
carefully and kept in a clearly visible place adjacent to the soldering unit. Failure to
adhere to warning instructions can lead to accidents and injuries or be detrimental to
health.

The WELLER WHS 40D soldering station complies with the EC certificate of
conformity in accordance with the basic safety standards of EC guidelines 89/336/EEC
and 73/23/EEC.

Warning notices

1. Keep your work area in proper order.

Always return the soldering tool to its original holder when not in use. Do not bring
combustible materials near the hot soldering tools.

2. Take care for the surroundings.

Don't use the soldering tool in a moist or wet environment.

3. Protect yourself against electrical shocks.

Avoid touching grounded parts with your body, e.g. pipes, heating radiators, stoves,
refrigerators.

4. Keep children at a distance.

Don't allow other persons to touch or disturb the soldering tool or cord. Keep other
persons away from your work area.

5. Use the appropriate soldering tool.

Don't use a soldering tool whose performance is not adequate for your work. Never
use the soldering tool for purposes for which is was not designed.

6. Wear suitable work cloths.

There is a danger of burning yourself with liquid solder. Wear the corresponding
protective clothing in order to protect yourself against burns.

7. Protect your eyes.

Wear protective eyewear. When working with bonding agents, it is particularly
important to observe the warning notices of the bonding agent manufacturer. Protect
yourself against spattering solder. There is a danger of burning yourself with liquid
solder.

8. Do not use the cord for purposes for which it is not designed.

Never carry the soldering tool by the cord. Don't use the cord to pull the power plug
from the socket. Protect the cord from heat, oil, and sharp edges.

9. Protect the work piece.

Use clamping devices to hold the work piece in place. This is more secure than using
your hands, and leaves both hands free to work with the soldering tool.

10. Avoid abnormal posture.

Set-up your work place with proper ergonomics. Avoid bad posture when working.
Always use the suitable soldering tool.

11. Take care of your soldering tool.

Keep the soldering tool clean for better and safer work. Follow the maintenance
instructions and the notices concerning changing the soldering tips. Regularly inspect
all connected cords and hoses. Repairs should only be carried out by a qualified
technician. Use only original WELLER replacement parts.

12. Remove the power plug from the socket before opening the unit.

13. Avoid unexpected operation.

Make sure that the mains switch is turned off when inserting the plug into the socket
or connecting to mains. Don't hold a soldering tool which is connected to a mains
supply while touching the mains switch.

14. Repairs to your soldering tool should be carried out by qualified technician

This soldering tool is in accordance with the relevant safety regulations. Repairs
should only be carried out by a qualified electrician using original WELLER
replacement parts. Failure to do so can lead to accidents for the operator.

15. Do not work on electrically live parts.

The grip of antistatic designed soldering tools is conductive.

GB