WX 1
9-18
DE
EN
FR
IT
ES
PT
NL
SV
DK
FI
GR
TR
CZ
PL
HU
SK
SL
EE
LV
LT
DE
EN
FR
IT
ES
PT
NL
SV
DK
FI
GR
TR
CZ
PL
HU
SK
SL
EE
LV
LT
Fig. 13
Fig. 11
Fig. 12
Fig. 14
6.3
Example 2:
Call up parameter menu and select menu option
1. Press and hold down keys 4 and 1 or 4 and 2 simultaneously.
While the device is changing over to the parameter menu, the
display shows the following message text (see also Fig. 11):
"Changing over to parameter menu" "Hold down keys".
2. Select menu option with the turn-and-click wheel (5).
The selection is shown with a black background (e.g. "Standby
Temp.", see Fig. 12).
3. Confirm the selection with the Enter key (6).
The display changes over to Selection/Entry mode (see Fig. 13).
4. Make your setting with the turn-and-click wheel (5).
5. Confirm the setting with the Enter key (6).
The setting is made and the parameter menu is displayed.
6. Select a new menu option with the turn-and-click wheel (5) and
set the required value (see steps 3.-5.)
–
or
–
exit the parameter menu with key (4).
6.4
Switching the channel ON/OFF
Please observe the overview diagrams (Fig. 7 and Fig. 8, page 10).
Z
Press control keys 1 and 2 simultaneously to switch the tool
on/off.
Channel disabled
If a channel is disabled, the display will read "OFF" (16).
6.5
Soldering and desoldering
Z
Carry out soldering work as directed in the operating instructions
of your connected soldering tool.
Handling soldering tips
−
Coat the tin-plated soldering tip with solder when heating the iron
for the first time as this will remove any oxide films or impurities
from the soldering tip that have accumulated during storage.
−
During pauses between soldering and before storing the soldering
iron, ensure that the soldering tip is well-coated.
−
Do not use aggressive fluxing agents.
−
Always make sure that the soldering tip is seated correctly.
−
Select the lowest possible working temperature.
−
Select the largest possible soldering tip shape for the application:
approx. as large as the soldering pad.
−
Coat the soldering tip well to ensure efficient heat transfer
between the soldering tip and soldering point.
−
Switch off the system if you do not intend to use the soldering iron
for lengthy periods or activate the Weller temperature reduction
function.
