14
GB
Thank you for the confidence you have shown in
buying this device.
The device has been manufactured in accordance
with the most rigorous quality standards which ensu-
re that it operates perfectly.
These instructions contain important information
which will help you to start up, operate and service
the device safely and correctly as well as to eliminate
simple faults and malfunctions yourselves.
Always pass on the device to third parties to-
gether with these operating instructions.
For your safety
Safety information
Read these instructions and
the accompanying safety
information carefully before
starting up the device and starting work with
the device.
Keep these instructions in a place that is acces-
sible to all users.
Residual risk
The device has been manufactured in ac-
cordance with state-of-the-art technology and
acknowledged regulations concerning safety.
There is nevertheless the risk of personal injury
and damage to property if you fail to observe
the safety information set out in the accompa-
nying booklet and the warnings given in these
instructions.
Warning!
Fire and explosion hazard!
The unit is not permitted to be used for the
extraction of inflammable gases.
The unit must not be exposed to temperatu-
res above 50°C, naked flame or condensed
solvents.
The organisation operating the unit is responsible
for the observance of the legal limits for noxious
substances at the place of work.
The filtration system may only be put into operation if
it is in perfect working order.
This appliance can be used by
children aged from 8 years and
above and persons with redu-
ced physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the appliance.
Cleaning and user maintenance
shall not be made by children
without supervision.
Specified Conditions Of Use
The solder fume extraction unit is a mobile filter unit for the separation of particulates and gases. The unit
is used for the filtration of exhaust air during soldering, gluing, cleaning, pressure processes etc., and is
suitable for continuous duty in industrial environments.
The unit is designed for use as a surface extraction unit and is not suitable for extracting fumes directly
from the soldering gun.
Intended use of the soldering station/ desoldering station also includes the requirement that you
adhere to these instructions,
observe all other accompanying documents,
comply with national accident prevention guidelines applicable at the place of use..
The manufacturer will not be liable for unauthorised modifications to the device.
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
