18
Setting the Alarms
You can set up to three alarms on the Wellion CALLA Dialog Meter. You must set
the clock before you can set the alarms. When an alarm sounds, the meter will turn
on, and a melody will sound for 30 seconds. Pressing the scroll wheel or inserting a
test strip will silence the alarm. You can set up one or all three alarms.
You will need:
Your Wellion CALLA Dialog Meter
Step 1:
Press and hold the scroll wheel to turn on the meter.
Step 2:
If the voice function is on, the meter will ask to insert a test strip. Press the scroll
wheel to enter setup screen.
Step 3:
Scroll up or down until start to flash. If the voice function is on, the meter will
say, “Set Testing Alarm.” Press the scroll wheel to enter alarm setting
SE
T
TING
THE
ALARMS
