24
WELLION
CALLA
MINI
Step 1: Insert a Wellion CALLA Blood Glucose Test Strip into the meter. Make
sure the test strip contact points are inserted all the way into the meter.
Close the test strip bottle immediately after you take out a strip.
Step 2: “
-
” will appear, on the screen before entering the main mode. Wait for
the test strip and flashing blood drop icons to appear on the meter display
screen.
Step 3: Squeeze a drop of Wellion CALLA Control Solution onto a clean, dry,
nonabsorbent surface. Do not apply control solution to the test strip di-
rectly from the bottle. Replace the bottle cap on the control solution bottle
immediately after use.
Step 4: While holding the meter, touch the control solution
to the edge of the test strip, and the control solution would
be automatically sipped into the reaction area of the test
TUSJQ)PMEUIFNFUFSVOUJMJUCFFQT