13
•
Misuse of the unit can result in electric and/or mechanical errors.
Therefore thorough understanding about usage is crucial.
•
The use of the unit is strictly limited to those who are trained and
qualified.
9. Maintenance
•
Please clean the unit at the end of each day.
•
For safe storage, follow below instructions:
(1) Do not expose the unit to any corrosive air.
(2) Do not expose to water or dust.
(3) Always keep the unit clean.
•
Contact Customer Service or your sales representative for support.
•
Regular check-up is crucial for keeping the unit in best conditions.
•
Do not adjust or alter the unit.
10. Troubleshooting Guide
The AquaGlo Plus is a very reliable machine. However, some issues may occur.
Below are some of the more common issues and suggested resolution steps.
Power Issues
Machine will not power up (no lights, no sounds).
1.
Ensure the outlet has power (plug a small lamp into the outlet).
2.
Unplug unit from wall outlet.
a.
Remove the electric cord from the AquaGlo Plus.
b.
Reseat power cord into machine.
c.
Attempt power up again.
3.
If power up is unsuccessful, contact Sybaritic Customer Service.
Vacuum\Output Issues
No vacuum
A no vacuum or no solution output problem can usually be resolved by performing
the “Aqua
Glo Plus
cleaning procedure,” which can be found in the owner’s manual
and at the end of this document.
1.
Turn on the machine and ensure the vacuum pump is running, there should
be a humming noise coming from the machine.