PREPARATION
Unplug hood and conveyor warmer
Allow to cool completely before cleaning
FREQUENCY
Daily
TOOLS
Mild Detergent
Soft Cloth or Sponge
1. Disconnect power from hood and conveyor warmer before cleaning.
2. Remove entry and exit canopies. Canopies may be washed in a
sink or dishwasher. Rinse and dry canopies thoroughly.
3. Wipe interior and exterior surfaces of hood with a soft cloth or
sponge dampened with water and a mild detergent.
IMPORTANT:
Never attempt to wash either filter.
Filters will absorb water if washed, causing food contamination and
possible equipment damage.
4. Rinse all washed areas by wiping with a clean soft cloth dampened
with clean water. Dry with a soft cloth.
5. Reinstall entry and exit canopies.
Procedure is complete
CAUTION!
Personal Injury
Hazard
Disconnect power from hood
and conveyor warmer before
cleaning.
IMPORTANT: DO NOT
spill
or pour water into controls,
control panel or wiring.
DO NOT
spill or pour water
into exhaust opening.
DO NOT
submerge hood in
water or wash with water or
steam spray. Damage to
internal components will
occur.
Damage to internal
components from water
damage is
not
covered by
warranty.
CLEANING INSTRUCTIONS
8
