background image

Safety instructions and warnings

12/82

1.5

Safety instructions and warnings

1.5.1

Operator's obligations

As the operator you are responsible for providing clear operating, cleaning
and maintenance instructions and ensuring the intended use and the proper
operation of the device by means of training and instruction for the personnel.
Your operating instructions must enable the safe use and safe operation of

the device and take into account the characteristics and expertise of your
company and also the national work safety and environmental protection
regulations (within the European Union, the EU directive 89/391/EEC).
In accordance with Directive 93/42/EEC or 2017/745/EU, accidents or other

incidents involving the dry water massage device must be reported to the
responsible authority – see page 79 .

Commissioning of the device is prohibited in the event of

defective cables,

defective plugs,

defective housing parts,

malfunctions.

1.5.2

Personnel training

The device is only to be used by personnel who are able to accept responsi-
bility for correct operation due to their training, knowledge or practical experi-
ence.
As the operator you are obliged to train your personnel and instruct them in

the established legal and accident prevention regulations. Ensure that your
staff have understood and observe these operation instructions. This applies,
in particular to the

Information in 'Intended use' and 'Foreseeable misuse'

Safety notes in Chapter 1.4 and Chapter 'Operation'

Operating instructions

Cleaning, disinfection and maintenance instructions

Please make the instructions and additional information from the manu-
facturer available to the personnel at their workplace.

Regularly check your personnel's safety consciousness and awareness
of the risks, taking into account your operating instructions.

You must ensure that the cleaning and disinfection intervals are complied
with, in particular cleaning and disinfection after every session.

You must ensure that your staff provide your user/patients with appropri-

ate advice, in particular regarding the types of application, possible risks
and the operation of the device.

Do not allow children to play with the device. Cleaning and user mainte-
nance tasks must not be carried out by children.

1.5.3

Scope of delivery

Information regarding the scope of delivery is contained in the 'Description'
chapter on page 24.

Summary of Contents for MEDWAVE TOUCH























































































Reviews: