Cleaning and maintenance
66/82
4.4
Maintenance performed by the Cus-
tomer Service department
WARNING!
Only use genuine spare parts of the same type! Material
damage or personal injuries may result when using other
parts.
Any liability for damage or injury proven to be the result of
the use of non-genuine spare parts is excluded.
Maintenance performed by authorized, trained and qualified staff
WARNING!
Danger to people from maintenance work that has not
been carried out!
If maintenance work is not carried out, it can lead to material
damage or personal injuries!
–
Maintenance work may only be carried out by personnel
who have been authorized, trained and qualified by JK
Products & Services, Inc.!
–
The operator is responsible for compliance with the
maintenance intervals!
The maintenance work must be carried out in accordance with checklist
1016789-.. by a JK Factory Certified Technician at the manufacturer or by
personnel who have been authorized, trained and qualified by the
manufacturer.
The correctly carried out maintenance work must be entered and confirmed in
checklist 1016789-..
The maintenance work must be carried out at the following intervals:
Annually or every 2000 hours, whichever is sooner.
Every 3000 hours
After 5 years or 4,000 hours, whichever is sooner.
After 8 years or 6,500 hours, whichever is sooner.
After 10 years or 20,000 hours, whichever is sooner.
Once the age of the device reaches ten (10) years from the date of manufac-
ture, its condition must be assessed by a JK-International GmbH, Division
JK-Global Service Certified Technician before use of the device can be con-
tinued.
Failure to have this device assessment performed may result in personal
injury or property damage.
Any liability is excluded if use of the device continues ten (10) years after the
date of manufacture, without the "condition assessment" having been per-
formed.
