FXSO H.323 Gateway User Manual
Document Ver.: 2.1a
Release Sep., 2003
Copyright (c) 2002 Welltech Computer Co. Ltd.
63
-idtime Inter-Digits time.(1~10 sec)
-forwardtime Forward time for FXS line if no answer.(5~65535 sec)
-keypad Select DTMF type: 0=In-band,
1=H.245 Alphanumeric,
2=H.245 SignalType,
3=Q.931 UserInfo.
4=RFC2833.
-prefixsw User defined local zone prefix switch.(ON:1 / OFF:0)
-prefixdisab Local zone prefix disable character.(one character
from 0~9, *, or NONE('-' key))
-usrdefprefix User defined local zone prefix.(0 ~ 20 digits)
-codec Codec select method.(Caller:0 / Master:1)
-localrbt Local ring back tone.(Enable:1 / Disable:0)
-gwprefix Drop gateway prefix when call from IP(Keep:0/Drop:1).
-hwtype Hardware type.(Auto:0 / 1FXS+1FXO:1 /
2FXS+2FXO:2)
-ring The ring time for ring detection.(Uint:ms)
-eod End of dial..(Enable:1 / Disable:0)
-fxotype FXO type.(Normal:0 / Force 2
nd
dial:1)
Example: sysconf -ring 500
usr/config$
Parameters Usage:
-print
print out all current settings
-idtime
set the duration(in second) of two pressed digits in dial mode
as timed out. If after the duration user hasn’t pressed next
number, it will dial out all number pressed. (1-10 seconds)
-forwardtime set forward time(5-65535 seconds)for FXS Line. If callee
hasn’t answered the call in this time, call will be forward to
assigned number in [line] command. (please refer to
[line]
command for forward setting)
-keypad
DTMF replay type. When value is “0”, Gateway will transfer
DTMF signal via In-Band type, “1” via H.245 UII Alphanumeric,
“2” via H.245 UII Signal Type, and “3” via Q.931 UserInfo, and
“4” via RFC2833 type. Users can adjust the value according
to various applications.
