LAN Phone 101 User Manual Guide
Document Ver. 1.8b
Copyright (c) 2003 WellTech Computer Corporation
LAN Phone Ver. 114/504(Normal and PPPoE)
22
5. [commit] command
Save any changes after configuring the LAN Phone 101.
6. [ifaddr] command
Configure and display the LAN Phone 101 IP information.
1. -
ip, -mask, -gate
: Set LAN Phone 101 IP Address, subnet mask and default gateway
respectively.
2. -
dhcp
: When DHCP function enables (
ifaddr –dhcp 1
), LAN Phone 101 will automatically
search DHCP server after execute the
commit
and
reboot
command.
Note: After LAN Phone catch a dynamic IP address form DHCP server, user can see this IP
address on LCD connect configuration.
3. -
sntp
: When sntp server is available, enable LAN Phone 101 SNTP function and point to
sntp server IP address.
(ifaddr –sntp 1 “xxx.xxx.xxx.xxx
”)
4. -
dns
:User can set Domain Name Server IP address. Once LAN Phone can connect with
DNS server, user can specify URL address instead of IP address for gatekeeper and phone
book IP address. (please refer to
12.[h323] command
and
3.9[pbook] command
)
5.
–timezone
: User can set different time zone according to the location LAN Phone is. For
example, in Taiwan the time zone should be set as 8,which means GMT+8. (GMT-8:
ifaddr –timezone -8
)
6.
-ipsharing
: If LAN Phone 101 is behind a IP-sharing , user can enable IP sharing function
and specify public IP address.(
ifaddr –ipsharing 0/1 “public IP address of IP sharing” ,
0
for disable and 1 for enable)
7. -
cmcenter:
Set management center IP address. IF user specifies management center IP
address, LAN Phone will send information to management center, let user can easily
configure via management center interface. (
ifaddr –cmcenter “IP address of
management center”
;
ifaddr –cmcenter x
to disable this function)
Summary of Contents for LAN PHONE 101
Page 1: ......
