LAN Phone 101 User Manual Guide
Document Ver. 1.8b
Copyright (c) 2003 WellTech Computer Corporation
LAN Phone Ver. 114/504(Normal and PPPoE)
34
2.
-hold
: set hold tone generation on or off. If other terminals support H.450 hold function, and
execute hold function when connecting with LAN Phone 101, user will hear hold tone from
LAN Phone 101. (0 for off ,1 for on)
19.[rom] command
1.
: show versions of all rom files.
2.
-app
,
-boot
,
-dsptest
,
-dspcore
,
-dspapp
,
-rbpcm
and
-htpcm
: upgrade main boot code,
main application code, DSP testing code, DSP kernel code, DSP application code, Ring
Back Tone PCM file and Hold Tone .
3.
-boot2m
:to upgrade 2mb rom file, which includes all firmware file mentioned in item 2.
Note:
1. After 2mb file download is finished, all configurations might change to default value,
user has to configure again.
2. MAC address might change to default value also, please
MUST
use command
setmac
:
Usage: key in command
setmac
key in MAC address (which you can see on a label attached at the bottom of
LAN Phone )with format:
00
01
a8
00
0x
xx
(It means to press enter each time after key in two characters.)
Summary of Contents for LAN PHONE 101
Page 1: ......
