56
Incoming Call Type:
Incoming call type
VOIP:
The incoming SIP call type
FXS:
The FXS extensions incoming call type
Matched Prefix:
matched DNIS (called number) prefix
Matched Incoming List:
matched DNIS incoming interface target
For VOIP incoming call type, the incoming target will be
the SIP trunk ID. Only the call from the selected SIP
Trunk will be accepted for this route.
For FXS incoming call type, the incoming target will be
the line ID (TEL1 and TEL2). Only the call is coming from
the selected line will be accepted for this route.
Matched Length:
matched DNIS (called number) length. To ignore
the length, please set to 0.
No Answer Timeout:
How long does the hunting continue to next
when the called target doesn’t answer.
Create Route Plan>Primary Route
Outgoing Type:
Outgoing call type (FXO or VOIP or FXS)
Hunting Type:
The hunting method can be used for this route.
Priority Ring:
The call was hunted based on the routing
list order one by one.
Cyclic Ring:
The call was hunted based on the cyclic
basis. This is the recommended method.
Routing List:
The routing target list was used for this route.
DM Group:
Select DM group 1 to 4 in case that it requires a DM routes
(for example, remove the prefix) before making the call.
