Publication date: August, 2012
Revision 1.0
Welltech Technology Co., Ltd.
194
3-23 SMTP Configuration
This function is used to set an Alarm trap when the switch alarm then you could set the SMTP
server to send you the alarm mail.
Web Interface
To configure the SMTP Configuration in the web interface:
1. Click Configuration, SMTP Configuration.
2. Scroll to select the Severity Level.
3. Specify the parameters in each blank field.
4. Click the save to save the setting.
5. If you want to cancel the setting then you need to click the Reset button.
It will revert to previous saved values.
Figure 3-23.1: The SMTP Configuration
Parameter description:
These parameters are displayed on the SMTP Configuration page:
Mail Server :
Specify the IP Address of the server transferring your email.
Username :
Specify the username on the mail server.
Password :
Specify the password on the mail server.
Sender :
To set the mail sender name.
Return-Path :
To set the mail return-path as sender mail address.
Email Address 1-6 :
Email address that would like to receive the alarm message.
Buttons:
Save
– Click to save changes.
Reset-
Click to undo any changes made locally and revert to previous saved
values.
