4-5.3 Port Status
The section describes to provides detailed NAS statistics for a specific switch port running
EAPOL-based IEEE 802.1X authentication.
Web Interface
To configure a NAS Port Status Configuration in the web interface:
1. Specify Port which want to check.
2. Checked “Auto-reflash”.
Figure 4-5.3: The NAS Statistics
Parameter description:
Port State
Admin State :
The port's current administrative state. Refer to NAS Admin State for a description of
possible values.
Port State :
The current state of the port. Refer to NAS Port State for a description of the individual
states.
QoS Class :
The QoS class assigned by the RADIUS server. The field is blank if no QoS class is
assigned.
Port VLAN ID :
The VLAN ID that NAS has put the port in. The field is blank, if the Port VLAN ID is not
overridden by NAS.
If the VLAN ID is assigned by the RADIUS server, "(RADIUS-assigned)" is appended to the
VLAN ID. Read more about RADIUS-assigned VLANs here.
If the port is moved to the Guest VLAN, "(Guest)" is appended to the VLAN ID. Read more
about Guest VLANs here.
Port Counters
EAPOL Counters :
These supplicant frame counters are available for the following administrative states:
• Force Authorized
• Force Unauthorized
