7
Owner’s Manual
WPD-120
TIMER
BUTTON
(2) Description of display panel for Icen dehumidifier
2) How to cancel TIMER function
- Press the 'Power on/off' button or reset selected time
3) The content displayed during TIMER function
(Current humidity, Target humidity) are displayed for 5
seconds and time left is displayed for 2 seconds
1) Time is set by pressing the TIMER button for a second
- If user do not press any buttons for 5 seconds, it returns to original
mode by pressing dehumidification button or selecting set time
- During setting mode, user controls setting range by pressing the
'UP' and 'DOWN 'button.
(Setting range: 0~12 hrs, it is either increased or
decreased by 30mins)
Current humidity,
Setup humidity
TEMP
1) Current humidity and Target humidity are displayed
2) How to see temperature: Press the blower and dehumidification
button at the same time for a second then inlet and outlet temperature
are displayed. The measurement returns from temperature to
humidity in 5 seconds ( + )
ALARM Lamp
Operates(blinks) when abnormality occurs. System operation
stops when it blinks longer than 3 minutes.
When cancelled within 3 minutes, system
