background image

8

9

Owner’s Manual

WPD-120

Maintenance

FILTER CLEANING 

(See Figures 5 and 6)

Dehumidifier WPD-120 has 2 filters, 
1) Open the front grill
2) Slide filter up and use a vacuum cleaner to remove the dust from the filter
3)  If the filter is heavily corvered with dust and dirt, warm water and mild sopa or neutral 
    deter gent may be used to wash the filter    
  

  Do not use any other chemicals to clean filter, as they will likely damage the filter.

4) Dry the filter in a shaded area before replacing it. Do not operate the unit without the filter 
    installed and the filter guard in the closed position
5) Replace the clean filter and close the filter grill

- To remove front filter pulling up filter flame.
- Slide filter up and use a vaccum cleaner to 
   remove the dust from the filter.

- Remove dust from the filter using a vacuum cleaner 
   hose attachment.
- if required wash the filter in lukewarm water 
   with a mild detergent. 
   Leave to dry in shaded area before reinstalling.

Note : 

 For effective dehumidification, clean the filter at least every 2 weeks.

Figure 5 – Removing Filters

Figure 6 – Removal of Dust

Summary of Contents for Icen WPD-120













Reviews: