How to manually reset the Wemo®
Mini Smart Plug, F7C063 to factory
defaults
Body
There are two scenarios where you will need to reset your Wemo® Mini Smart Plug,
F7C063.
Scenario 1:
If you see a blinking orange light on your Wemo® Mini Smart Plug,
F7C063, you will need to restore your Wemo Mini by following the steps below:
NOTE:
If you changed your Wi-Fi router but you want to save its friendly name and the
Rules applied to it,
skip
Step 2
below.
Step 1:
Press and hold the power button.
Step 2: Unplug
your Wemo Mini then
plug it back
in while holding the
power button down.
Step 3:
Continue to hold the power button down until the light blinks
rapidly then release it.
Step 4:
If the light alternately
blinks orange and white
, then it is
ready for setup. Click
here
for instructions on how to set up your
Wemo Mini.
The reset process will take 30-90 seconds to complete.
Scenario 2:
If you are unable to locate your Wemo Mini on your phone’s Wi-Fi list or in
your Wemo App, you can proceed to do the following:
Step 1: Unplug
the Wemo Mini from the power outlet.
Step 2:
Plug the Wemo Mini back into the power outlet.
Step 3:
The light will blink white to signify it is starting up. When the
light turns to a
solid white
light then it is connected to the network.
Knowledge Article
http://belkin.force.com/Articles/articles/en_US/How_To/How-to-manuall...
1 of 2
10/30/2017 10:51 PM
