background image

WARRANTY STATEMENT

WEN Products is committed to build tools that are dependable for years. Our warranties are consistent with this 
commitment and our dedication to quality.

LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE 

GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN 
consumer power tools will be free from defects in material or workmanship for a period of two (2) years from 
date of purchase. Ninety days for all WEN products, if the tool is used for professional use.

Seller’s sole obligation and your exclusive remedy under this Limited Warranty and, to the extent permitted by 
law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which 
are defective in material or workmanship and which have not been misused, carelessly handled, or misrepaired 
by persons other than Seller or Authorized Service Center. To make a claim under this Limited Warranty, you 
must make sure to keep a copy of your proof of purchase that clearly defines the Date of Purchase (month and 
year) and the Place of Purchase. Place of purchase must be a direct vendor of Great Lakes Technologies, LLC. 
Third party vendors such as garage sales, pawn shops, resale shops, or any other secondhand merchant void 
the warranty included with this product.  Contact techsupport@wenproducts.com or 1-800-232-1195 to make 
arrangements for repairs and transportation. 

When returning a product for warranty service, the shipping charges must be prepaid by the purchaser. The 
product must be shipped in its original container (or an equivalent), properly packed to withstand the hazards 
of shipment. The product must be fully insured with a copy of the warranty card and/or the proof of purchase 
enclosed. There must also be a description of the problem in order to help our repairs department diagnose 
and fix the issue. Repairs will be made and the product will be returned and shipped back to the purchaser at 
no charge.

This limited warranty does not apply to accessory items that wear out from regular usage over time including 
belts, brushes, blades, etc. 

Any implied warranties shall be limited in duration to two (2) years from date of purchase. Some states in the 
U.S., Some Canadian provinces do not allow limitations on how long an implied warranty lasts, so the above 
limitation may not apply to you.

In no event shall seller be liable for any incidental or consequential damages (including but not limited to liability 
for loss of profits) arising from the sale or use of this product. Some states in the U.S. And some Canadian prov-
inces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or 
exclusion may not apply to you.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to 
state in the U.S., province to province in Canada and from country to country.

This limited warranty applies only to portable electric tools, bench power tools, outdoor power equipment and 
pneumatic tools sold within the united states of American, Canada and the commonwealth of Puerto Rico. For 
warranty coverage within other countries, contact the WEN customer support line.

THANKS FOR REMEMBERING

20

Summary of Contents for 61731





















Reviews: