MAINTENANCE
ROUTINE INSPECTION
Before each use, inspect the general condition of the tool. If any of these following conditions exist, do not
use until parts are replaced or the sharpener is properly repaired.
Check for:
• Loose hardware or improper mounting,
• Misalignment or binding of moving parts,
• Damaged cord/electrical wiring,
• Cracked or broken parts, and
• Any other condition that may affect its safe operation
CLEANING & STORAGE
1. After every operation, use a vacuum to remove dust and chips from the tool surfaces, motor housing and
work area. Keep the ventilation openings free from dust and debris to prevent the motor from overheating.
2. Wipe the tool surfaces clean with a soft cloth or brush. Make sure water does not get into the tool.
3. Periodically, remove the throat plate and lower spindle washer and remove any dust accumulation in the
throat plate area.
WARNING:
To avoid accidents, turn OFF and unplug the tool from the electrical outlet before
cleaning, adjusting, or performing any maintenance or lubrication work.
WARNING:
Any attempt to repair or replace electrical parts on this tool may be hazardous. Ser-
vicing of the tool must be performed by a qualified technician. When servicing, use only identical WEN
replacement parts. Use of other parts may be hazardous or induce product failure.
CAUTION
:
Most plastics are susceptible to damage from various types of commercial solvents. Do not
use any solvents or cleaning products that could damage the plastic parts. Some of these include but
are not limited to: gasoline, carbon tetrachloride, chlorinated cleaning solvents, and household deter-
gents that contain ammonia.
LUBRICATION
All ball bearings are sealed and permanently lubricated. No further lubrication is required.
PRODUCT DISPOSAL
Used power tools should not be disposed of together with household waste. This product contains electron-
ic components that should be recycled. Please take this product to your local recycling facility for respon-
sible disposal and to minimize its environmental impact.
4. Store the tool in a clean and dry place away from the reach of children. Store sanding accessories away
from extremely hot/dry temperatures.
Do not bend or fold the sanding sleeves.
15
