ASSEMBLY & ADJUSTMENTS
9. INSTALLING THE FILTER BAG
Hang the filter bag (white) onto the hook of the upper bag
support pole. Attach the bag over the top opening of the
collector. Secure it with a bag clamp (O).
10. INSTALLING THE COLLECTION BAG
Attach the plastic collection bag over the bottom open-
ing of the collector around the rubber strip. Bag clips are
located around the collector to assist in holding up the
collection bag. The clips are placed slightly above the legs
so that the bag can be held at the suitable height. Simply
lift the metal plate of the clips and tuck in the bag. Then,
use the second bag clamp (O) to secure the bag all the
way around the collector.
11. INSTALLING THE HANDLE
Install the handle (N) onto the back of the collector using
M8x20 hex screws as shown.
NOTE:
When transporting the dust collector, only pull on
the handle. Do not use the support poles for transporta-
tion purposes as they are not designed for pulling and
might come loose.
Your dust collector is now ready to be placed into ser-
vice. Before connecting to a power source, be sure the
power source is properly grounded and is of proper
voltage and amperage (See page 7, Electrical Informa-
tion).
Fig. 10
11