MAINTENANCE
WARNING!
Always ensure that the tool is switched off and the plug is removed from the outlet before mak-
ing any cleaning, adjustments or maintenance procedures. Servicing of the tool must be performed by a quali-
fied technician.
1. Before each use, inspect the general condition of the tool.
Check for:
• Loose hardware,
• Misalignment or binding of moving parts,
• Damaged cord/electrical wiring,
• Cracked or broken parts, and
• Any other condition that may affect its safe operation.
1. Regularly clean dust, chips and other particles from the dust collector. If operation is excessively dusty or dirty,
frequent inspection of motor is required. Vacuum any particles that may have entered the motor.
2. Inspect the dust collector for any damaged or worn parts. Replace any damaged parts immediately for safe and
efficient operation. Frequently check that all nuts, bolts, screws have not loosened due to vibration.
3. Regularly check and empty the collection bag. Always wear respirator and safety glasses when removing, empty-
ing or replacing collection bags. Empty dust away from ignition sources and into an approved container.
4. Store the tool in a clean and dry place away from the reach of children.
PRODUCT DISPOSAL
Used power tools should not be disposed of together with household waste. This product contains electronic com-
ponents that should be recycled. Please take this product to your local recycling facility for responsible disposal and
to minimize its environmental impact.
13
