Wen LA3424 Instruction Manual Download

Page: 3 / 24

Model Number

LA3424

Motor

120V, 60 Hz, 4.5A

Swing Over Bed

12 Inches

Distance Between Centers

18 Inches

Single Speeds

520, 900, 1400, 2150, and 3400 RPM

Spindle Taper

MT2

Spindle Thread

1" - 8

Tailstock Taper

MT2

Quill Travel

2 Inches

Tool Rest Length

7-7/8 Inches

Face Plate Diameter

3-1/8 Inches

Product Dimensons

30-1/4 in. x 8-3/4 in. x 16-1/4 in.

Product Weight

70.3 lbs

SPECIFICATIONS

INTRODUCTION

Thanks for purchasing the WEN Wood Lathe. We know you are excited to put your tool to work, but first, please

take a moment to read through the manual. Safe operation of this tool requires that you read and understand this

operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety

concerns, as well as helpful assembly and operating instructions for your tool.

NOTE:

The following safety information is not meant to cover all possible conditions and situations that may occur.

WEN reserves the right to change this product and specifications at any time without prior notice.

At WEN, we are continuously improving our products. If you find that your tool does not exactly match this manual,

please visit

wenproducts.com

for the most up-to-date manual or contact our customer service at

1-800-232-1195

Keep this manual available to all users during the entire life of the tool and review it frequently to maximize

safety for both yourself and others.

SAFETY ALERT SYMBOL:

Indicates danger, warning, or caution. The safety symbols and the explanations

with them deserve your careful attention and understanding. Always follow the safety precautions to reduce the

risk of fire, electric shock or personal injury. However, please note that these instructions and warnings are not

substitutes for proper accident prevention measures.

Summary of Contents for LA3424

























Search results

Summary of Contents for LA3424

Reviews:

Related manuals for LA3424

Brands by name

Popular brands

Wen LA3424, Instruction Manual

Search results

Summary of Contents for LA3424

Reviews:

Related manuals for LA3424

Brands by name

Popular brands