background image

CONTENTS

WELCOME 3

Introduction ..................................................................................................... 3
Specifications ................................................................................................... 3

SAFETY 4

General Safety Rules ........................................................................................ 4
Planer Safety Warnings .................................................................................... 6
Electrical Information ....................................................................................... 7

BEFORE OPERATING 

 8

Unpacking & Packing List .................................................................................8
Know Your Planer ............................................................................................ 9
Assembly & Adjustments ............................................................................... 10

OPERATION & MAINTENANCE

 11

Operation ....................................................................................................... 11
Maintenance ....................................................................................................16
Troubleshooting Guide ................................................................................... 18
Exploded View & Parts List .............................................................................20
Warranty Statement ........................................................................................23

2

To purchase accessories for your tool, visit 

WENPRODUCTS.COM

Multi-Purpose Planer Stand 

(Model 6588T)

Multi-Purpose Rolling Planer and Miter Saw Stand 

(Model MSA658)

Replacement Blades, 3-pack, SK5 Steel 

(Model BP133K)

Replacement Blades, 3-pack, M2 Steel 

(Model BP133M)

Summary of Contents for PL1303

























Reviews: