15
The previous assembly instructions were for Arc Configurations.
To arrange risers in a Straight Configuration, every other riser in the configuration must have the
positioning of the Steps and the Back Rail Horizontal Tubes reversed.
1. With the riser in the Performance Position, remove
the four Wing Nuts from the underside of each Step.
2. Remove each Step and rotate 180 degrees. Reattach
the rotated Steps in reverse order with the longest
Step at the front and the shortest Step at the rear.
Reattach the Wing Nuts to the underside of each Step.
3. Remove the Back Rail Horizontal Tubes by removing
the Locking Nuts on the rear side of the Upright Tubes.
Reattach the Horizontal Tubes through the rear side of
the Upright Tubes and secure the Lock Nuts from the
front side.
S
TRAIGHT
C
ONFIGURATION
Rotate Steps 180 degrees
and reverse order from
longest to shortest.
Attach Horizontal Bars
to the rear side of the
Upright Tubes.