background image

Owner’s Manual

Tourmaster Risers

Series 024F 2-Step

Series 024F 3-Step with foot-operated slider

To Set Up a 3-Step Riser ...................................................................................2
To Take Down a 3-Step Riser ............................................................................4
To Set Up a 2-Step Riser ...................................................................................5
To Take Down a 2-Step Riser ............................................................................7
To Lock Units Together.......................................................................................8
To Reverse the Step Arrangement (3-Step Riser) .............................................8
To Reverse the Step Arrangement (3-Step Riser with Optional 4th-Step Unit) .9
To Attach an Optional 4th Step to a 3-Step Riser ............................................10
To Attach an Optional Back Rail to a 3-Step Riser...........................................11
To Store a Back Rail (3-Step Risers) ...............................................................12
To Attach Optional Side Rails to the Riser.......................................................13
To Store Risers on the Optional Riser Cart......................................................16

Load Back Rails ...........................................................................................16
Load Risers onto the Cart............................................................................19
Load 4th-Steps onto the Cart.......................................................................23

Replacement Parts List ....................................................................................24

Basic 3-Step Unit .........................................................................................24
Basic 2-Step Unit .........................................................................................25
4th-Step Unit (for 3-Step Riser)....................................................................26
Back Rail (for 3-Step Riser) .........................................................................27
Side Rails .....................................................................................................28
Riser Cart .....................................................................................................29

Troubleshooting................................................................................................30
Warranty...........................................................................................................31

Please take a few minutes to read this
manual and to familiarize yourself with
Tourmaster’s unique operating features.
If you should need additional information
on your new Tourmaster Riser, just
write or phone.

©Wenger Corporation 2011

Printed in USA 08/11

Part #024H636-01

Wenger Corporation,

555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

Questions? Call.....USA: 800-4WENGER (493-6437) • Worldwide: 1-507-455-4100 • www.wengercorp.com

Summary of Contents for Tourmaster 024F Series
































Reviews:

Related manuals for Tourmaster 024F Series