20
LOAD RISeRS ONTO THe CART
CONTINUeD
3. With two people working together, place the first Riser onto the Cart. The Positioning Wheels
will hang over the right end of the Cart Support Frame.
Note:
The 13-inch Swing Arm must be on the right side of the Cart. If the 13-inch Swing Arm is not
on the right side of the Cart, it is assembled incorrectly. Call Customer Service for
assistance in the correct assembly.
Folded Riser
Riser Positioning Wheels
Riser is placed with Positioning Wheels hanging
over the right end of the Support Frame
4. Close the two lower Swing Arms. It will be necessary to lift all of the Arms high enough for the
two lower Arms to clear the Riser.
Note:
When the Swing Arm Keeper is inserted into the Holding Socket, a dangerous pinch point
develops. Serious injury is possible if this precaution is not observed.
!
wArNINg
A Dangerous pinch
point develops
when the Swing
Arm closes.
Swing Arms shown in the
closed position.
Back Rails are not
shown for clarity
!
CAUTION
Always start
loading Risers at
the bottom of the
Riser Cart.
Riser Cart
Folded Riser
Positioning Wheels must
hang outside of the Cart.
!
CAUTION
Always use two
people to load
risers
TO sTOre rIsers ON The OpTIONAl rIser CArT
(
CONTINUed
)
