3
1. Proper Use
This wenglor product has to be used according to the following functional principle:
High-performance distance sensor
High performance distance sensors which use the principle of angle measurement determine the distance
between the sensor and the object. These sensors have small working ranges (under 1 m) and recognize
objects with high precision. Some sensors use a high-resolution CMOS line array and DSP signal processing.
The color, shape and texture of the objects to be recognized does not affect the sensors’ measurements. Even
dark objects can be reliably detected against a bright background.
They can be operated with very high speeds or very high resolutions. The measured value can be output as an
analog value. Furthermore, Teach-In, filter functions for adjusting a switching output, and an error output are
available. The measuring range can be selected individually within the working range.
2. Safety Precautions
• This operating instruction is part of the product and must be kept during its entire service life.
• Read this operating instruction carefully before using the product.
• This product is not suitable for safety applications.
• Installation, start-up and maintenance of this product has only to be carried out by trained personal.
• Tampering with or modifying the product is not permissible.
• Protect the product against contamination during start-up.
Laser/LED warning
For the respective Laser Class/LED Group please view the technical data of the product.
LASERSTRAHLUNG
NICHT IN DEN STRAHL BLICKEN
LASER KLASSE 2
EN60825-1: 2007
Pp<1.0 mW, t<2000
µ
s,
λ
= 620-690 nm
LASER RADIATION -
DO NOT STARE INTO BEAM
620 - 690 nm < 1mW
CLASS 2 LASER PRODUCT
CAUTION
Caution:
Use of controls, adjustments or performance of procedures other than those specified herein may result
in hazardous radiation exposure.
LASER CLASS 1
EN60825-1
2007
Class Laser 1 (EN 60825-1)
Observe all applicable standards
and safety precautions.
Class Laser 2 (EN 60825-1)
Observe all applicable standards and
safety precautions.
The enclosed laser warning labels
must be attached and visible at all
time. Do not stare into beam.
