59
8.2 Annual Inspection
Inspection once a year or before expiration of deadlines specified by applicable national regulations.
Inspection
The machine has not undergone any changes or manipulations which might affect the safety
system.
The ESPE has not undergone any changes or manipulations which might affect the safety system.
The ESPE is correctly connected to the machine.
The machine’s response time (including ESPE) has not increased in comparison with response
time during initial start-up.
Cables, plugs and mounting components must be in flawless condition.
NOTE!
• Work at the machine must be immediately stopped if any impairment of the safety function
is detected.
• If the safety function is impaired, test the effectiveness of the ESPE at the machine once
again in accordance with the checklist
(see section “12.5 Initial Start-Up Checklist” on
.
8.3 Daily Inspection
Daily inspections must be conducted by a person who has been authorized and engaged to do so by the
company which operates the machine when work begins, and whenever a new shift is started.
Inspection
The ESPE may not demonstrate any visible damage.
The lens cover may not be scratched or contaminated.
It must be impossible to approach the danger zone without passing through the safety field of the
ESPE.
Cables, plugs and mounting components must be in flawless condition.
Summary of Contents for SEMG412
Page 75: ...75 ...
