8
EN
2.3 Personnel Qualifications
• Suitable technical training is a prerequisite.
• In-house electronics training is required.
• Technical knowledge and experience concerning use of the guard is required in order to assure correct
evaluation of the safe working status during assembly, initial start-up and electrical installation.
• Trained personnel must have uninterrupted access to the operating instructions.
CAUTION!
Risk of personal injury or property damage in case of incorrect initial start-up and
maintenance!
Personal injury and damage to equipment may occur.
• Adequate training and qualification of personnel
2.4 Modification of Products
NOTE!
Modification of the product is impermissible.
Non-observance may result in loss of the CE marking and the guarantee may be rendered
null and void.
2.5 General Safety Precautions
NOTE!
• These instructions are an integral part of the product and must be kept on hand for the
entire duration of its service life.
• Read the operating instructions carefully before using the product.
• Protect the sensor against contamination and mechanical influences.
• Additional measures may be necessary in order to assure that the ESPE does not fail in a
dangerous fashion due to other types of light which are used in a special application (e.g.
resulting from the use of cordless controllers on cranes, emission due to welding sparks
or the effects of stroboscope lights).
2.6 Approvals and protection class
RoHS
Summary of Contents for SEMG412
Page 75: ...75 ...
