Installing battery
As in the following diagrams, open the battery compartment door by sliding the switch to "open". Insert the battery in the
direction of the triangle mark toward the battery compartment. Close the compartment door, and slide the switch to "lock"
position.
This section introduces some basic yet important prepration steps as well as some basic
operations.
Fig
3-1
Fig
3-3
Fig
3-2
Fig
3-4
Getting
Started
06
Charging the battery
◆
Plug in the adaptor into the wall plug outlet. Flip up the protective cover on handle, and insert the charging plug into the
charging port.
◆
When the indicator LED on handle turns RED, the charging process has started
。
◆
When the battery is fully charged, the LED indicating light will go off
。
◆
After your battery is fully charged, please remove the charging plug as soon as possible, and cover the port with the
protective cover. In addition, please remove the adaptor from
the wall outlet.
◆
If you intend not to use your
G
P1 for long period of time, please remove the battery, and place it in a clean and cool area.
Remark: In normal room temperature, it requires about 30 minutes for completely discharged battery to be fully charged.
The charging time may vary according to the temperature and power remained in the battery.