17
© wePresent 2017
WICS-2100-USER-GUIDE-01
6.2.1.3 Energy Savers
1.
Standby after (minutes): If there is no client connection detected during the standby timeout
period, the Base Unit will enter the selected standby mode. [The default value is 0 (minute)].Click on
“Choose image” to browse and select the image file you want to upload.
2.
If you set the value > 0 (minutes), you should select either the “ECO standby” mode or the “Deep
standby” mode.
3.
Click “Save changes” to apply your new settings.
6.2.2 Wi-Fi & Network
WiCS-2100 can act as a dual band wireless access point, at 2.4GHz and 5GHz,
enabling the broadcast of an additional wireless SSID signal on either bandwidth.
6.2.2.1 Hostname & Domain Name
1.
Hostname: You can set up a hostname for your WiCS-2100 device to distinguish it in the network.
[The default value is WiCS-2100-xxx (xxx are the last three characters of the MAC ID shown on
the bottom of the WiCS-2100 box)].
2.
Domain name: You can also set up a domain name. [The default value is NULL].
3.
Click “Save changes” to apply your new settings.
Web Management
6
