17
WiPG-1600 User’s Manual
according to the encryption mode you selected
♦
Channel Bandwidth: “20MHz” or “Auto” (20MHz/40MHz) [The default value is
“Auto”]
< AP Client >
♦
Connect to Existing AP: The default value is “Disable” (if you choose “Enable”,
input the SSID of the existing AP you want to connect to).
♦
Encryption: The default value is “Disable” (if you “Enable” the “Connect to
Existing AP” function, you can select “WEP”, “WPA AES”, “WPA2 AES”, “WPA
TKIP” or “WPA2 TKIP”)
♦
Key: (If the “Encryption” function is enabled,) you have to set the “Key” value
according to the encryption mode you selected.
< Gatekeeper >
♦
You can choose “All Pass”, “All Block”, or “Internet Only” [The default value is
“All Pass”]
< SNMP >
♦
You can choose “Enable” or “Disable” [The default value is “Enable”]
< Apply >
♦
Click the “Apply” button, and follow the reboot instructions as they appear on
the screen (for the modifications to take effect).
< Cancel >
♦
Cancel all the modifications