5. Download the MirrorOp (Sender) App
• Windows Phone/Windows RT not supported by MirrorOp
1)
Make sure your PC/Mac is WiFi-enabled, and connect
your PC/Mac to the WiPG-1600 through WiFi. You can
find the WiFi network name (SSID) of your WiPG-1600
device on the standby screen of the projector/display.
[Default SSID is wePresent-xxx (xxx are the last three
characters of the MAC ID shown on the bottom of the
WiPG-1600)]
2)
Open the browser of your computer, and enter the IP
address or the device hostname in the address bar of
the browser. You can find the IP address and hostname
on the standby screen of the projector/display. [Default
IP address is 192.168.100.10; default hostname is
wePresent-xxx (xxx are the last three characters of the
MAC ID shown on the bottom of the WiPG-1600)]
3)
Click
, and download the portable version of the
MirrorOp (Sender) app for Windows (Windows 7/8/10)
or Mac (macOS 10.9 and above). [If you want to know
the difference between the portable version and installed
version of the MirrorOp app, please refer to the User’s
Manual.]
Windows
Mac
