30
WiPG-1600W User’s Manual
1360 x 768 (WXGA)/ 1440 x 900 (WXGA+)/
1600 x 1200 (UXGA)/ 1920 x 1080 (1080p)/
1920 x 1200 (1200p)/ Auto Detect (HDMI)
Code: You can select “Disable”, “Random”, or “Use the following code”
to set a specified 4-digit number as the login code.
< Date and Time Settings >
Choose “SNTP/NTP Server Synchronization” or “Disable” to specify the
time server or disable this feature.
Note: “SNTP/NTP Server Synchronization” is enabled by default. If
you disable this feature, the automatic firmware update may
not run on the correct schedule. .
Time Zone: Specify the time zone
Daylight Saving Time: Enable/Disable
< SharePod Paring Settings >:
Choose “Apply wePresent’s WiFi settings” or “Apply the following WiFi
settings”. (If you choose “Apply the following WiFi settings”, input the
SSID to which the SharePod should connect.)
Encryption: The default setting is “Disable”. (If you have entered the SSID
manually, you can also choose “WEP”, “WPA AES”, “WPA2 AES”, “WPA
TKIP”, or “WPA2 TKIP”.)
Key: If the “Encryption” function is enabled, you have to set a key value
according to the encryption mode you have selected.
< AirPlay >
“Enable” or “Disable” the AirPlay feature.
Note:
If a login code is set on the WiPG-1600W device, you will be asked for
a password when you use AirPlay on Mac or iOS devices. Please enter
the same login code in the AirPlay password dialog box.
The AirPlay protocol does not support the moderator functions. After
moderation (conference control) is enabled, users’ attempts to
connect to the WiPG-1600W via AirPlay will be rejected. Thus, if you
want to use AirPlay, you need to connect your sender device to the
