66
WiPG-1600W User’s Manual
13
Frequently Asked Questions
Q: Why can’t I access the WiPG-1600W web UI (user interface) through a
web browser?
A: This may be because your sender device (PC/Mac/mobile device) and the
receiver device (WiPG-1600W) are not on the same intranet. In order to
troubleshoot this, you can try any of the following:
•
Set the WiPG-1600W as an access point (AP), and connect your
sender device to the WiPG-1600W’s WiFi.
•
Connect your sender device to the WiPG-1600W via a router.
•
Use an Ethernet cable to connect your sender device to the
WiPG-1600W.
Q: Why can’t the MirrorOp app find the WiPG-1600W device?
A: This may be because your sender device ((PC/Mac/mobile device) and the
receiver device (WiPG-1600W) are not on the same subnet. In order to fix
this issue, you can try any of the following:
•
Set the WiPG-1600W as an access point (AP), and connect your
sender device to the WiPG-1600W’s WiFi.
•
Connect your sender device to the WiPG-1600W via a router, and
make sure they get an IP address automatically (via DHCP from the
router).
•
Use an Ethernet cable to connect your sender device to the
WiPG-1600W.
To check if your sender device and the WiPG-1600W are on the same
subnet, you can compare the IP address of the sender device with that of
