WERKU WK400100, Original Instructions Manual

3

English

ENG

invites to accidents

►

Remove keys or tools 

before starting the power tool

►

A left key or tool 

attached to a rotating part of a power tool can 

cause personal injury.

USE AND CARE OF POWER TOOLS.

►

Do not force the power tool

►

Use the correct 

power tool for your application

►

The correct power 

tool will do the job better and safer at the rate for 

which it was conceived

►

Do not use the power tool 

if the switch cannot be positioned to “off” and “on” 

position

►

Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired

►

Remove the plug from the power supply and/or 

battery before making any adjustments, changing 

accessories or storing the power tool

►

Such 

preventive safety measures reduce the risk of 

starting the power tool accidentally.

STORE POWER TOOLS.

►

Store power tools out of reach of children and 

not allow the handling of power tools to people 

unfamiliar with the tools or these instructions 

►

Power tools are dangerous in the hands of 

untrained users.

MAINTENANCE.

►

Check moving parts for misalignment or binding, 

there are no broken parts or other conditions 

that may affect the operation of power tools 

►

Power tools are repaired before use when they 

are damaged 

►

Many accidents are caused by 

poorly maintained power tools 

►

Use power tools, 

accessories and tool tips, etc. according to these 

instructions and in the manner provided for the 

particular type of power tool, taking into account 

the conditions work and work to develop 

►

The use 

of the power tool for applications other than those 

intended could result in a dangerous situation 

►

Please check your power tool serviced by a 

Werku

®

 official repair service using only identical 

replacement parts 

►

This will ensure the safety of 

the power tool is maintained.

CHECK THE GOOD CONDITION OF THE 

SANDER.

►

Make sure that all the screws in the sander are 

perfectly tightened 

►

In cold climates or when the 

sander has not been used for a period, allow the 

sander to warm up by leaving it to run empty for a 

few minutes, to ensure that all internal components 

are perfectly lubricated 

►

Make sure that the possible 

installed accessories are perfectly fitted in place.

BEFORE STARTING WORK.

►

Make sure that the suction sander is firmly 

supported before using 

►

Check that no one is 

standing beneath you when using the suction 

sander in high areas 

►

Keep your hands away 

from all moving parts of the suction sander.

DURING THE OPERATION.

►

Do not leave the suction sander operating without 

having it firmly fixed 

►

Only turn it on when you 

are sure you have full control over it 

►

Do not point 

the suction sander at anyone while in use 

►

When 

operating the suction sander will produce vibrations 

►

The screws may gradually come loose, and 

possibly cause faults or accidents 

►

Keep your hands 

away from all moving parts of the suction sander.

AT FINISH WORKING.

►

Do not touch the possible accessories installed 

in the suction sander after use 

►

It may be hot and 

cause burns 

►

Some materials worked with may 

contain chemicals or toxic components 

►

Avoid 

inhaling these substances or allowing them to 

come into contact with your skin 

►

Use PPE 

designed to prevent and protect against incidents 

of this kind.

DESCRIPTION OF THE PRODUCT.

►

The sander has been designed to carry out jobs 

of polishing and sanding 

►

Refer to this plan to 

familiarize yourself with the sander before use.

3

2

1

4

5

  1. Switch.

  2. Handle.

  3. Dust collector.

  4. Base.

  5. Speed selector.